SAMD21G Mangler - Part2 - Designing a 3D printed chip holder

SAMD21G Mangler - Part2 - Designing a 3D printed chip holder

In part 2 of my SAMD21G Mangler project I'm going to design a 3D printed part that will hold the SAMD21 chip in place on the PCB to ensure the pins on the chip stay registered with the pads on the PCB.

 

ReflowMaster PCB Final Assembly

ReflowMaster PCB Final Assembly

Hey David Watts: Reply #2 - I got new pens!

Hey David Watts: Reply #2 - I got new pens!